How to get the most out of ShipConstructor and your HGG machine?
A CAD model contains a lot of data about the parts to be cut. Traditionally people would program all this data again to cut the parts. This is a very time consuming and unnecessary process. Thanks to a successful integration, ShipConstructor can easily be connected to an HGG Profile Cutting Line.
Detailing
SSI ShipConstructor contains a catalog with pre-defined end cuts, cut-outs and penetrations. These tools can be defined and applied to speed-up the detailing process. All parts need to be detailed including markings to guarantee complete extraction of design data.
Data Export
One of the features of SSI Enterprise-Platform PubliserLT is the extraction of design data from the ShipConstructor model. PublisherLT can export parts as enriched .dxf-files which contain all data needed for 3D profiling. The export includes data and geometry of both the part and the markings. HGG’s ProCAD comes with a hardware key to enable import and conversion of these special .dxf-files by ProCAM Framework for further processing.
The integration between SSI ShipConstructor and HGG supports extraction and processing of design data including bevels.
Profiles supported
- Tees
- Bulbs
- Flats
- Angles
Importing of other profiles with HGG’s ProCAM Framework like H, I and U beams available on request.
Part geometry
- ‘End cuts’ of part ends.
- ‘Cut-outs’ in the web of a profile for crossing profiles.
- ‘Penetrations’ like holes of piping.
- ‘Trim angles’ for basic part detailing by straight lined cuts.
Marking geometry
- ‘Inverse bend lines’ for easy and accurate bending of bulbs;
- ‘Reference marking’ for easy and accurate fitting of parts;
- ‘Part ID’s’ of the part itself or the ID of a connecting part.
