HGG Cutting Services
Beam cutting services
Description
We specialize in profiling beams for both welded and bolted connections, serving a wide range of industries including infrastructure, offshore wind, process industries, and steel construction. Our advanced profiling process ensures exceptional accuracy, and we offer additional features such as welding edges, ratholes, holes, and slots for increased versatility.
Various beam profiles, including UNP, HEA, and HEB, can be efficiently handled in a variety of sizes and lengths up to 24 meters.
Specifications
Width, thickness & tolerances
Min. 50 x 35 mm. – Max. 1.220 x 424 mm.
Wall thickness
Min. 3 – Max. 40 mm.
- Endcut and intermediate cut tolerance ± 2 mm, up to and including a thickness of 25 mm.
- Endcut and intermediate cut tolerance ± 2 mm plus 0,02 x thickness, from a thickness of 25 mm.
- Length tolerance is 2x endcut tolerance plus 1/10.000 from length of the material
Need help or guidance?
Receive a targeted advice and proposal based on your situation and wishes.
This is why our clients choose us:
- Time and cost-saving
- Unmatched accuracy
- Dedicated support
Interested in our service?
Sales Engineer
Ad Rietveld
- (+31) 6 233 898 64
- a.rietveld@hgg-group.com
- Europe
Sales Engineer
Bart Meijer
- (+31) 6 211 254 17
- b.meijer@hgg-group.com
- Europe
Sales Engineer
Arthur Schouten
- (+31) 6 273 583 84
- aps@hgg-group.com
- Europe
Why choose for HGG?
Reliable partner with 40 years of experience
HGG has been cutting profile steel, such as tubes, beams and tubes, for decades with its own developed machines and software.
Short lead times and a large capacity
With our modern machinery with a large range, HGG takes care of all your profile cutting work within the requested delivery time. Due to our large storage area and machinery, HGG has a large capacity.
The solution for your staff shortage
HGG is active in various industries and takes a lot of manual work off your hands by cutting a wide variety of profiles, making it an extension of your workshop.
Tailor-made for all your profiles
With our advanced software, we cut any desired shape, resulting in less fit time, welding volume and welding time. You will receive a complete construction kit from us, including the desired welding pre-treatment and any markings and fit lines.
Our 4-step process
We take the weight of your shoulders with a simple and clear 4-step process that ensures quick delivery and meets the highest industry standards.
Specialized advice in advance
From our 40 years of 3D profiling experience, we know that every cut can be different. We assist you in the preparation of your project. From engineering, to welding details to optimizing material usage.
Get your quote
Based on your data, preferably in STEP format, we send you a tailored project quote within a few days of your request. If you regularly outsource projects with us, we are eager to take it a step further by establishing a partnership. Assuring you with production capacity and price stability.
Start Work Preparation & Production
After receiving your final models and material we will prepare cutting files using our ProCAM software. Once these files are ready production will be started at our production facility using the machine which suits best to the materials that need to be cut.
Pick-up or get your shipment delivered
After completion of the cutting job, you will receive a message that your materials are ready to be picked up. If you need us to deliver the materials to your site we will make those arrangements.
“One of the biggest advantages of HGG is that they make a bevel on the cut profiles. That saves us many grinding hours.'
Hans Peter Labee – Fitter at Hollandia
Our additional services
Additional Holes and Slots
In addition to the final cuts, we can add holes and slots for various applications. These can also be prepared with the desired welding preparations, such as a ½ V-groove or X/K-groove.
Adding Reference lines and Markings
Our machines can apply reference lines and footprint markings using either a needle or plasma. This not only speeds up fitting time but also ensures higher quality. By incorporating these markings into your engineering plans beforehand, we can replicate them directly in our production process.
Certified for Re-marking
We are certified by Lloyd’s Register Nederland B.V. to transfer markings and numbers and issue inspection reports 3.1 and 3.2 in accordance with EN 10204:2004.
Delivery, Storage & Transport
Materials are usually delivered to us by you or your supplier. We have a large storage area capable of accommodating large-diameter and long-length material. However, we can also arrange transportation for you, ensuring materials are picked up and returned to the desired location. We partner with a transportation provider who offers daily services both within the Netherlands and internationally.
Our accreditations and memberships
Our drawing guidelines
We are flexible with our drawing guidelines; however, we do prefer the options listed below for a speedy process. If you have a different file format or need assistance in preparing your files, feel free to contact our team.
STEP (3D)
We convert STEP files into cutting files with HGG’s ProCAM. Our system reads STEP files in freeform shapes without relying on macros, providing you with design freedom.
- For round tube: Closed Contour
- For square tube: Inside radius + Wall thickness = Outside radius
- Parts must contain only one solid
- No root faces <2mm
- No gradient root face
DSTV (2D)
No extra post-processor is required because HGG’s ProCAM can import and read data for DSTV (NC/NC1) files. Enriched files, with a 3rd party post-processor are also possible.
- Possible for Beams
- Possible for Box
- Possible for Profiles
- Not possible for Pipes
Need assistance or advice?
Give me a call or sent us an email with your challenge.
