Cutting angle bars and other profiles with weld preparation

Services de decoupe de profiles

    • Minimum
      75x75 mm
      3x3"
    • Maximum
      1220x430 mm
      48x16.9"

    Let us do the cutting!

    Vous recevez un ensemble prêt au soudage, de sorte que vous pouvez vous concentrer sur un ajustement et un soudage faciles et rapides. Nous proposons toute une gamme de services de découpe de profilés pour vous aider à découper n’importe quelle forme sur vos structures en acier avec une précision extrême, et avec chanfrein et découpes intermédiaires. Nos machines CNC pour découper des barres d’angle, etc. sont conçues et fabriquées par nos soins.

    Features

    Spécifications

    Size75x75mm -1220x430mm (3x3" - 48x16.9")Track and tracePermanent and non permanent marking
    LocationAt HGGCADAutocad, Tekla and many others
    MaterialAngle bar (un)equal, T bar, ChannelCertificationsISO 9001; Lloyds 3.1 & 3.2;
    Kelby Beukema, Sales Engineer- HGG

    “We can cut all the stiffeners you need for fabricating your vessels: bulbs, strips, angles and T bars.”

    Kelby Beukema, Sales Engineer- HGG
    Play video

    Cutting Angle Bars Application

    What is your greatest worry in a fabrication process? Is the it complexity of the design, poor production flow management, too much material waste, loss of control over the operating expenses or the lack of highly skilled welders? Then, how do you deal with the increasingly tough demands and regulations on welded structural design?

    Cargo Ships

    Achieving fabrication efficiency and high throughput are key goals within the highly competitive cargo vessels fabrication market. Shipyards using traditional profile cutting methods experience difficulties in achieving those targets. We can cut your material on our highly productive stiffener profiles cutting machines, so that you can reach your fabrication targets.

    Industry application: Cutting angle bars for flat panel, double bottom constructions, subassemblies, bulkheads, webs, micro panel in LNG carriers, super tankers, container ships, chemical tankers, bulk carriers, RoRo vessels, ice breakers, FPSO’s Supply boat, crane ships, Hopper

    Naval Ships

    Naval ships are fabricated out of a large number of different in size and length stiffeners. Material handling, material sorting and part nesting are thus extremely complex. We can cut your material on our stiffener cutting machines, thus help you to shorten your fabrication cycle significantly.

    Industry application: Cutting angle bars for flat panel, double bottom constructions, subassemblies, bulkheads, webs, micro panel in air craft carriers, patrol boats, cruisers, frigates, hospital ships etc.

    Mega Yachts

    In the demanding world of fabrication of mega yachts, flexibility is key to be able to deal with last minute changes. Quality comes second best and asks for handling production batches of numerous short and small stiffeners of exotic materials. We can cut your material on our profile cutting machines, which are highly productive and can handle a wide size range.

    Industry application: Cutting angle bars for flat panel, double bottom constructions, subassemblies, bulkheads, webs, micro panel in super yachts, mega yachts, sailing yachts, motor yachts etc.

    Cruise Ships

    Cruise ships are also characterised by an enormous volume and variety of small and short stiffeners. Automation in fabrication has been long adopted in these yards where strict requirements are put forward in respect to integration with the yards panel lines. We have extensive experience in profile cutting and can therefore help you optimize your process.

    Industry application: Cutting angle bars for flat panel, double bottom constructions, subassemblies, bulkheads, webs, micro panel in cruise ships, cruise liners, passenger ships etc.

    Step 1

    Contact us and get an expert advice on profile cutting
    Years of experience has helped us to be able to give you expert advice on a smooth transfer of 3D-models into cutting files, welding details and optimized nesting.

    Step 2

    Send us your preliminary drawings
    With our in-house developed software, we offer you freedom to design. We connect to all major CAD-systems. Time consuming manual programming is not necessary. Send us your digital drawings or NC data and we will import them into our CAD-CAM system.

    Step 3

    Send us your raw materials and tell us your schedule
    Based on your drawings our experienced machine operators cut your material into ready-to-weld parts. We stay flexible in order to fit into your schedule.

    Step 4

    Receive all cut parts ready for fitting and welding
    After cutting your profiles, we bring them to you, ready for fitting and welding. So you can concentrate on your core-business.

    Want to know more about our Profile Cutting Services?

    Ask our 3D Profiling experts: