CNC Pipe Cutting machine for vessels and offshore

SPC 1500–3000 PT

  • Minimum
    75 mm
    60"
  • Maximum
    3000 mm
    118"

CNC Pipe Cutting machine

The SPC 1500–3000 PT machine is a very robust machine built to handle large pipe diameters and heavy weights. Everything in the machine is designed with the purpose to guarantee extreme tolerances during cutting.
MORE INFORMATION

Savings on Fitting and Welding

Savings on Fitting and Welding

Using skilled welders for laying-out cuts, manual cutting, grinding and is time wasted. These welders are hard to find and a potential bottleneck in your fabrication process. The SPC range automates these processes, allowing welders to do what they do best, welding.

Elimination of Lay-out

Elimination of Lay-out

The amount of time spent on laying-out all cut-outs is very time consuming and often unsafe. After initializing on the zero reference point of the structure, accurate and fast positioning of the SPC marking/cutting tool allows for smooth operator control.

Thick Wall Accuracy

Thick Wall Accuracy

Deviations during cutting impact welding volume, especially on thick-walled pipes. This hampers your production throughput and increases your fitting and welding costs. The SPC 3000’s patented auto focus robot is designed for executing accurate positioning and movement.

Specifications

SPC 1500 PT 75 –1525 mm (3"–60") 18 / 30t 6 / 12 m (20’ – 40’)
SPC 2000 PT 100–2035 mm (4"–80")
SPC 2500 PT 200–2500 mm (8"–98")
SPC 3000 PT 200–3000 mm (8"–118") 30 / 40 / 50 / 60t
  • Oxy-fuel Cutting Oxy-fuel Cutting
  • Plasma Cutting Plasma Cutting
  • Marking Marking
  • CAD Connection CAD Connection

3D Profiling shapes

Here is a selection of profiling shapes for realizing connections on pipes and tubes:

Chamfer

A pip-to-plate connection.

Rotated Oblong Hole

To fit inserted plates at pipe ends or to create intermediate slots.

Saddle Offshore

A pipe-to-pipe connection with a slope less than 50° based on AWS for offshore industries.

Crown

Offshore specific profiling shape for crown shim cutting to secure foundation piles on the top of a jacket leg.

Crossing Saddle

Eccentric and intermediate pipe to pipe connection that continues on both sides.

Kurt Schaerer - General Manager – Enerflex
“A large vessel, cut as one piece, used to take us roughly 40-50 hours to cut by hand. Now, with the SPC 1500-3000 PT CNC pipe cutting machine, we we can cut it in less than 4 hours!”
Kurt Schaerer - General Manager – Enerflex
Play video

Want to know more about the CNC pipe cutting machine, SPC 1500 – 3000 PT?

Ask our 3D Profiling experts:

Oxy fuel pipe cutting applications

What is your greatest worry in a fabrication process? Is it the complexity of the design, poor production flow management, inefficient material handling with too much material waste, loss of control over the operating expenses, or the lack of highly skilled welders? Then, how do you deal with the increasingly tough demands and regulations on welded structural design?

Offshore Fabrication

Substituting manual work with automated oxy fuel pipe cutting is an increasingly popular solution for tough project deadlines in offshore. The SPC 1500-3000 CNC pipe cutting machine is very suitable for fabricating thick-walled pipes, where accuracy is key and weld volume need to be reduced to an absolute minimum.

More and more offshore fabricators are solving their highly deadline-driven production challenges by automating their oxy fuel pipe cutting processes. By employing automated solutions, fabricators easily gain better control over the fabrication process and save time on fitting and welding. The SPC 1500-3000 CNC pipe cutting machine helps fabricators deal with the increasingly tough demands and regulations on welded structural design.

Industry application: oxy fuel pipe cutting of jackets, jacket legs, bracings, nodes, offshore wind jackets, offshore wind tripods

Pressure Vessels

Laying out the hole pattern, executing the cutting and then fitting and welding the parts together are all very time consuming processes. When cutting thick-walled pipes, holes need to be truly round and the cuts need to be highly accurate because any deviation during cutting might increase the welding volume significantly. With the SPC 1500-3000 CNC pipe cutting machine, the time needed for (oxy fuel) pipe cutting a typical shell together with welding in the nozzles, is reduced from 8-10 hours to 1 hour only.

Pre-fabricated vessels and piping systems need to be assembled under strict pipe shop regulations. By automating the cutting process and applying smart weld preparation techniques, materials are ready for fast and easy fitting and welding. An automated cutting process also significantly reduces weld volume. As a result, on-site labor costs are reduced by 30%!

Industry application: oxy fuel pipe cutting of pressure vessels, nozzles, boilers, heat exchangers

Stay on top of your business

Sign up for our newsletter

It is a quick & easy way to get updates on industry events, be the first to hear about our new product and have easy access to our newest articles. We will keep you informed about the latest developments and industry trends, but not more than once a month.
Keep me posted